MS565: A SPECT Tracer for Evaluating the Brain Penetration of BAF312 (Siponimod).

BAF312 (siponimod) is a sphingosine-1-phosphate (S1P) receptor modulator in clinical development for the treatment of multiple sclerosis, with faster organ/tissue distribution and elimination kinetics than its precursor FTY720 (fingolimod). Our aim was to develop a tracer to better quantify the penetration of BAF312 in the human brain, with the potential to be labeled for positron emission tomography (PET) or single-photon emission computed tomography (SPECT). Although the PET radioisotopes (11)C and (18)F could have been introduced in BAF312 without modifying its structure, they do not have decay kinetics compatible with the time required for observing the drug's organ distribution in patients. In contrast, the SPECT radioisotope (123) I has a longer half-life and would suit this purpose. Herein we report the identification of an iodinated derivative of BAF312, (E)-1-(4-(1-(((4-cyclohexyl-3-iodobenzyl)oxy)imino)ethyl)-2-ethylbenzyl)azetidine-3-carboxylic acid (18, MS565), as a SPECT tracer candidate with affinity, S1P receptor selectivity, overall physicochemical properties, and blood pharmacokinetics similar to those of the original molecule. A whole-body autoradiography study performed with [(14)C]MS565 subsequently confirmed that its organ distribution is similar to that of BAF312. This validates the selection of MS565 for (123)I radiolabeling and for use in imaging studies to quantify the brain penetration of BAF312.

Phenotypic and metabolic investigation of a CSF-1R kinase receptor inhibitor (BLZ945) and its pharmacologically active metabolite.

1. 4-[2((1R,2R)-2-Hydroxycyclohexylamino)-benzothiazol-6-yloxyl]-pyridine-2-carboxylic acid methylamide (BLZ945) is a small molecule inhibitor of CSF-1R kinase activity within osteoclasts designed to prevent skeletal related events in metastatic disease. Key metabolites were enzymatically and structurally characterized to understand the metabolic fate of BLZ945 and pharmacological implications. The relative intrinsic clearances for metabolites were derived from in vitro studies using human hepatocytes, microsomes and phenotyped with recombinant P450 enzymes. 2. Formation of a pharmacologically active metabolite (M9) was observed in human hepatocytes. The M9 metabolite is a structural isomer (diastereomer) of BLZ945 and is about 4-fold less potent. This isomer was enzymatically formed via P450 oxidation of the BLZ945 hydroxyl group, followed by aldo-keto reduction to the alcohol (M9). 3. Two reaction phenotyping approaches based on fractional clearances were applied to BLZ945 using hepatocytes and liver microsomes. The fraction metabolized (fm) or contribution ratio was determined for each metabolic reaction type (oxidation, glucuronidation or isomerization) as well as for each metabolite. The results quantitatively illustrate contribution ratios of the involved enzymes and pathways, e.g. the isomerization to metabolite M9 accounted for 24% intrinsic clearance in human hepatocytes. In summary, contribution ratios for the Phase I and Phase II pathways can be determined in hepatocytes.

Application of a deuterium replacement strategy to modulate the pharmacokinetics of 7-(3,5-dimethyl-1H-1,2,4-triazol-1-yl)-3-(4-methoxy-2-methylphenyl)-2,6-dimethylpyrazolo[5,1-b]oxazole, a novel CRF1 antagonist.

Deuterium isotope effects were evaluated as a strategy to optimize the pharmacokinetics of 7-(3,5-dimethyl-1H-1,2,4-triazol-1-yl)-3-(4-methoxy-2-methylphenyl)-2,6-dimethylpyrazolo[5,1-b]oxazole (NVS-CRF38), a novel corticotropin-releasing factor receptor 1 (CRF1) antagonist. In an attempt to suppress O-demethylation of NVS-CRF38 without losing activity against the CRF1 receptor, the protons at the site of metabolism were replaced with deuterium. For in vitro and in vivo studies, intrinsic primary isotope effects (KH/KD) were determined by the ratio of intrinsic clearance (CLint) obtained for NVS-CRF38 and deuterated NVS-CRF38. In vitro kinetic isotope effects (KH/KD) were more pronounced when CLint values were calculated based on the rate of formation of the O-desmethyl metabolite (KH/KD ∼7) compared with the substrate depletion method (KH/KD ∼2). In vivo isotope effects were measured in rats after intravenous (1 mg/kg) and oral (10 mg/kg) administration. For both administration routes, isotope effects calculated from in vivo CLint corresponding to all biotransformation pathways were lower (KH/KD ∼2) compared with CLint values calculated from the O-demethylation reaction alone (KH/KD ∼7). Comparative metabolite identification studies were undertaken using rat and human microsomes to explore the potential for metabolic switching. As expected, a marked reduction of the O-demethylated metabolite was observed for NVS-CRF38; however, levels of NVS-CRF38's other metabolites increased, compensating to some extent for the isotope effect.

A perspective on tritium versus carbon-14: ensuring optimal label selection in pharmaceutical research and development.

Tritium ((3) H) and carbon-14 ((14) C) labels applied in pharmaceutical research and development each offer their own distinctive advantages and disadvantages coupled with benefits and risks. The advantages of (3) H have a higher specific activity, shorter half-life that allows more manageable waste remediation, lower material costs, and often more direct synthetic routes. The advantages of (14) C offer certain analytical benefits and less potential for label loss. Although (3) H labels offer several advantages, they might be overlooked as a viable option because of the concerns about its drawbacks. A main drawback often challenged is metabolic liability. These drawbacks, in some cases, might be overstated leading to underutilization of a perfectly viable option. As a consequence, label selection may automatically default to (14) C, which is a more conservative approach. To challenge this '(14) C-by-default' approach, pharmaceutical agents with strategically selected (3) H-labeling positions based on non-labeled metabolism data have been successfully implemented and evaluated for (3) H loss. From in-house results, the long term success of projects clearly would benefit from a thorough, objective, and balanced assessment regarding label selection ((3) H or (14) C). This assessment should be based on available project information and scientific knowledge. Important considerations are project applicability (preclinical and clinical phases), synthetic feasibility, costs, and timelines.

Metal complexes of modified cyclen as catalysts for hydrolytic restriction of plasmid DNA.

Simple and novel nuclease models have been synthesized. These involve metal-binding ligand 1,4,7,10-tetraazlcyclododecane (cyclen) tethered to an acridine ring (a DNA-binding group) by amide linkers of various lengths. Binding of these probes to DNA was studied by monitoring changes in their UV-visible spectra affected by the presence of DNA. Titration of these compounds with increasing amounts of pBR322 DNA caused hypochromic effects and shifted the acridine absorption at 360 nm to a longer wavelength. Under biologically relevant conditions (37 degrees C and pH 7.4), specific transition metal complexes of these compounds are found to be highly effective catalysts toward the hydrolysis of plasmid DNA. This is demonstrated by their ability to convert the super-coiled DNA (form I) to open-circular DNA (form II). Structure-activity correlation studies show that hydrolytic activity depends on both the structure of ligand (L(1)>L(2)>L(3)) and the nature of metal ion cofactor (Co(3+)>Zn(2+)>Cr(2+)>Ni(2+)>Cu(2+)>Fe(3+)).

Discovery of potent, selective, orally bioavailable stearoyl-CoA desaturase 1 inhibitors.

Stearoyl-CoA desaturase 1 (SCD1) catalyzes the committed step in the biosynthesis of monounsaturated fatty acids from saturated, long-chain fatty acids. Studies with SCD1 knockout mice have established that these animals are lean and protected from leptin deficiency-induced and diet-induced obesity, with greater whole body insulin sensitivity than wild-type animals. In this work, we have discovered a series of potent, selective, orally bioavailable SCD1 inhibitors based on a known pyridazine carboxamide template. The representative lead inhibitor 28c also demonstrates excellent cellular activity in blocking the conversion of saturated long-chain fatty acid-CoAs (LCFA-CoAs) to monounsaturated LCFA-CoAs in HepG2 cells.

Cytochrome P450 3A4-catalyzed testosterone 6beta-hydroxylation stereochemistry, kinetic deuterium isotope effects, and rate-limiting steps.

Testosterone 6beta-hydroxylation is a prototypic reaction of cytochrome P450 (P450) 3A4, the major human P450. Biomimetic reactions produced a variety of testosterone oxidation products with 6beta-hydroxylation being only a minor reaction, indicating that P450 3A4 has considerable control over the course of steroid hydroxylation because 6beta-hydroxylation is not dominant in a thermodynamically controlled oxidation of the substrate. Several isotopically labeled testosterone substrates were prepared and used to probe the catalytic mechanism of P450 3A4: (i) 2,2,4,6,6-(2)H(5); (ii) 6,6-(2)H(2); (iii) 6alpha-(2)H; (iv) 6beta-(2)H; and (v) 6beta-(3)H testosterone. Only the 6beta-hydrogen was removed by P450 3A4 and not the 6alpha, indicating that P450 3A4 abstracts hydrogen and rebounds oxygen only at the beta face. Analysis of the rates of hydroxylation of 6beta-(1)H-, 6beta-(2)H-, and 6beta-(3)H-labeled testosterone and application of the Northrop method yielded an apparent intrinsic kinetic deuterium isotope effect ((D)k) of 15. The deuterium isotope effects on k(cat) and k(cat)/K(m) in non-competitive reactions were only 2-3. Some "switching" to other hydroxylations occurred because of 6beta-(2)H substitution. The high (D)k value is consistent with an initial hydrogen atom abstraction reaction. Attenuation of the high (D)k in the non-competitive experiments implies that C-H bond breaking is not a dominant rate-limiting step. Considerable attenuation of a high (D)k value was also seen with a slower P450 3A4 reaction, the O-dealkylation of 7-benzyloxyquinoline. Thus P450 3A4 is an enzyme with regioselective flexibility but also considerable regioselectivity and stereoselectivity in product formation, not necessarily dominated by the ease of C-H bond breaking.

Testosterone 1 beta-hydroxylation by human cytochrome P450 3A4.

Human cytochrome P450 3A4 forms a series of minor testosterone hydroxylation products in addition to 6 beta-hydroxytestosterone, the major product. One of these, formed at the next highest rate after the 6 beta- and 2 beta-hydroxy products, was identified as 1 beta-hydroxytestosterone. This product was characterized from a mixture of testosterone oxidation products using an HPLC-solid phase extraction-cryoprobe NMR/time-of-flight mass spectrometry system, with an estimated total of approximately 6 microg of this product. Mass spectrometry established the formula as C(19)H(29)O(3) (MH(+) 305.2080). The 1-position of the added hydroxyl group was established by correlated spectroscopy and heteronuclear spin quantum correlation experiments, and the beta-stereochemistry of the added hydroxyl group was assigned with a nuclear Overhauser correlated spectroscopy experiment (1 alpha-H). Of several human P450s examined, only P450 3A4 formed this product. The product was also formed in human liver microsomes.

Rate-limiting steps in oxidations catalyzed by rabbit cytochrome P450 1A2.

Several issues regarding the rate-limiting nature of individual reaction steps in catalysis by rabbit liver cytochrome P450 (P450) 1A2 were addressed using anisoles and other substrates. Substrate binding is very fast (k > 10(6) M(-1) s(-1)). Product release is not rate-limiting, as shown by the absence of bursts, placing rate-limiting steps at or before product formation. We had previously shown that the first 1-electron reduction step is fast (k > 700 min(-1)), even in the absence of ligand [Guengerich, F. P., and Johnson, W. W. (1997) Biochemistry 36, 14741-147500]. O(2) binding to ferrous P450 is fast (k >/= 10(6) M(-1) s(-1)). The decay of the P450 Fe(2+)-substrate-O(2) complex was slow in the absence of NADPH-P450 reductase, with a first-order rate constant of 14 min(-1) at 25 degrees C. During the decay, product was formed (from the substrate methacetin) in 61% theoretical yield, although this reaction requires electron transfer among P450 molecules and may not be related to normal turnover. Steady-state spectra suggest that one or more iron-oxygen complexes accumulate, representing entities between the Fe(2+)-O(2) complex and putative FeO(3+) entity. Kinetic isotope effect experiments were done with several substrates, mainly anisoles. Apparent intrinsic deuterium isotope effects as high as 15 were measured. In all cases, the C-H bond-breaking step is at least partially rate-limiting. The isotope effects were not strongly attenuated in noncompetitive or competitive experiments, consistent with relatively rapid P450-substrate exchange, except with the active enzyme Fe-O complex. Kinetic simulations with the available data (i) are consistent with the view that C-H bond breaking is a major rate-limiting step, (ii) demonstrate that increasing the rate of this step will affect k(cat), K(m), and kinetic hydrogen isotope effects but will only increase catalytic efficiency to a certain degree, (iii) indicate that increasing ground-state binding can increase catalytic efficiency but not k(cat), and (iv) suggest that nonproductive binding modes and abortive reduction of O(2) are factors that attenuate catalytic efficiency.

Generation of new protein kinase inhibitors utilizing cytochrome p450 mutant enzymes for indigoid synthesis.

Indigoids, a class of bis-indoles, represent a promising protein kinase inhibitor scaffold. Oxidation of indole by cytochrome P450 (P450) has been shown to generate species (indoxyl, isatin) that couple to yield indigo and indirubin. Escherichia coli-expressed human P450 2A6 mutants isolated from a randomized library were incubated with 27 substituted indole derivatives. Extracts of the cultures were screened for inhibition of human cyclin-dependent kinases (CDK)-1 and -5 and glycogen synthase kinase-3 (GSK3). The extracts from cultures incubated with 5-methoxyindole were the most inhibitory. High-performance liquid chromatography (HPLC) separation yielded a mixture of seven colored indigoids. These indigoids included indigo, indirubin, the di(5-methoxy) derivatives of indigo and indirubin, and both of the possible mono 5-methoxy derivatives of indirubin, which were all identified by visible, mass, and NMR spectra. Cultures with 5-methylindole added to the media also yielded inhibitory material, and 5- and 5'-methylindirubin were characterized. The most inhibitory of these indigoids were the monosubstituted indirubins and 5,5'-dimethoxyindirubin, which was > or =10x more active than indirubin. Thus, the overall approach involves the use of a library of randomized enzyme mutants to activate component moieties of a desired set of larger molecules, thus yielding a library of drug candidates that can be screened and characterized. The general strategy may have additional applications.

Aryl hydrocarbon receptor activation and cytochrome P450 1A induction by the mitogen-activated protein kinase inhibitor U0126 in hepatocytes.

The aryl hydrocarbon receptor (AhR) is involved in various processes such as cytochrome P450 (P450) 1A induction after xenobiotic exposure. It is also considered to play a major role in cell proliferation and differentiation. Recent evidences have suggested a cross-talk between AhR functions and the mitogen-activated protein kinase (MAPK) cascade. We now report that 1,4-diamino-2,3-dicyano-1,4-bis[2-aminophenylthio]butadiene (U0126), a specific inhibitor of MAPK kinase (MEK) MEK1/2, elicits a marked increase in CYP1A1 expression at both mRNA and protein levels associated with a significant increase of enzyme activity in primary rat hepatocytes and a human hepatoma cell line. This induction occurred independently of MEK/extracellular signal-regulated kinase (ERK) activation and in the absence of ERK1 and ERK2 expression. The effect of U0126 was mediated by its ability to transactivate xenobiotic responsive element (XRE)-driven genes, as demonstrated by transfection assays with an XRE-driven luciferase construct in the human B16A2 hepatoma cell line. CYP1A1 modulation was abolished by a cotreatment with resveratrol, an established AhR antagonist, arguing for AhR activation by U0126. Such an effect was demonstrated by direct in vitro ligand binding competition assays using rabbit liver cytosol, showing that this compound binds AhR with an EC(50) = 25 x 10(-6) M. Moreover, we demonstrated that U0126 is a substrate for several P450s including human CYP1A2, -1A1, and -1B1. We conclude that the widely used specific inhibitor of MEK/ERK, U0126, also acts as a potent AhR activator and an inducer of related genes. Such effects on the AhR may have an impact on biological functions attributed previously to MAPK inhibition.

Inhibition of arginine gingipains (RgpB and HRgpA) with benzamidine inhibitors: zinc increases inhibitory potency.

We assayed several benzamidine derivatives for inhibition potency with HRgpA and RgpB gingipains, enzymes which are involved in the pathogenesis of gingivitis and periodontal disease. The benzamidine derivatives proved to be effective inhibitors of HRgpA and RgpB, with the best inhibitor being a bis-benzamidine with a urea linker (Ki=30 microM). The inhibition potency was increased 2-3 fold in the presence of low concentrations of zinc with the benzamidines containing a urea moiety linking the two aromatic rings. We propose an inhibition model involving a tetrahedral zinc atom coordinated with the active site Cys and His of gingipain and the urea linker in the benzamidine inhibitor. In summary, we have discovered a new series of effective inhibitors for the gingipains and found a novel way to increase inhibitor potency with the HRgpA and RgpB gingipains using zinc.

Microsomal oxidation of tribromoethylene and reactions of tribromoethylene oxide.

Halogenated olefins are of interest because of their widespread use in industry and their potential toxicity to humans. Epoxides are among the enzymatic oxidation products and have been studied in regard to their toxicity. Most of the attention has been given to chlorinated epoxides, and we have previously studied the reactions of the mono-, di-, tri-, and tetrachloroethylene oxides. To further test some hypotheses concerning the reactivity of these compounds, we prepared tribromoethylene (TBE) oxide and compared it to trichloroethylene (TCE) oxide and other chlorinated epoxides. TBE oxide reacted with H(2)O about 3 times faster than did TCE oxide. Several hydrolysis products of TBE oxide were the same as formed from TCE oxide, i.e., glyoxylic acid, CO, and HCO(2)H. Br(2)CHCO(2)H was formed from TBE oxide; the yield was higher than for Cl(2)CHCO(2)H formed in the hydrolysis of TCE oxide. The yield of tribromoacetaldehyde was < 0.4% in aqueous buffer (pH 7.4). In rat liver microsomal incubations containing TBE and NADPH, Br(2)CHCO(2)H was a major product, and tribromoacetaldehyde was a minor product. These results are consistent with schemes previously developed for halogenated epoxides, with migration of bromine being more favorable than for chlorine. Reaction of TBE oxide with lysine yielded relatively more N-dihaloacetyllysine and less N-formyllysine than in the case of TCE oxide. This same pattern was observed in the products of the reaction of TBE oxide with the lysine residues in bovine serum albumin. We conclude that the proposed scheme of hydrolysis of halogenated epoxides follows the expected halide order and that this can be used to rationalize patterns of hydrolysis and reactivity of other halogenated epoxides.

Tetrachloroethylene oxide: hydrolytic products and reactions with phosphate and lysine.

Tetrachloroethylene, or perchloroethylene (PCE), has considerable industrial use and is of toxicological interest because of a variety of effects. Most of the existing literature presents PCE oxide as a critical intermediate in the oxidative metabolism of PCE to Cl(3)CCO(2)H, oxalic acid, and products covalently bound to proteins, including trichloroacetyl derivatives of lysine. PCE oxide was synthesized by photochemical oxidation of PCE and characterized. Decomposition at neutral pH (t(1/2) = 7.9 min at 0 degrees C, 5.8 min at 23 degrees C, 2.6 min at 37 degrees C) yielded only trace ( approximately 1%) Cl(3)CCO(2)H; the major products identified were CO (73% yield) and CO(2) (63% yield). In phosphate buffer (0.10 M) a major product was identified as oxalyl phosphate. Oxalyl chloride also reacted to form CO and CO(2) in aqueous solution and to form oxalyl phosphate in neutral phosphate buffer. Oxalyl phosphate decomposed to oxalic acid (t(1/2) = 53 min at 37 degrees C) but did not react with lysine. Reaction of PCE oxide with free lysine yielded the oxalic acid amide derivatives of lysine plus lysine dimers in which cross-linking of the amino groups involved oxalo linkage. The reaction of PCE oxide with albumin yielded mainly N(6)-oxalolysine and some (<5%) N(6)-trichloroacetyllysine. We propose a reaction pathway for PCE oxide based on our previous studies with trichloroethylene oxide, in which C-C bond scission is a major product of reaction in aqueous buffer and yields CO and CO(2). Oxalyl species are proposed as intermediates and prominent acylating species formed in the reactions of the epoxide. The formation of Cl(3)CCO(2)H in cytochrome P450 reactions is postulated to result from intramolecular migration within an enzyme intermediate.